diff --git a/controller/main_controller.py b/controller/main_controller.py
index 31be6ca..f1cb2d1 100644
--- a/controller/main_controller.py
+++ b/controller/main_controller.py
@@ -63,6 +63,33 @@ class MainController:
         """更新UI状态"""
         # print(f"更新UI状态: {prop} = {value}")
 
+        if prop == "feed_status" and value == 4:
+            # 盖板到位的情况, 更新 管片任务 (目前)
+            self.main_window.update_segment_tasks()
+            return
+        
+        if prop == "mould_finish_weight":
+            # 模具车中料的重量
+            current_mould_weight = value
+            if self.system.state._mould_need_weight != 0:
+                # 计算 模具车 和 生产进度
+                progress = int((current_mould_weight / self.system.state._mould_need_weight) * 100) # 去掉百分号之后的整数
+                progress = min(progress, 100) # 限制为100
+                self.main_window.arc_progress.setProgress(progress)
+                self.main_window.production_progress.setProgress(progress)
+            return
+        
+        if prop == "upper_volume":
+            # 上料斗方量
+            self.hopper_controller.onUpdateUpperHopperVolume(value)
+            return
+        
+        if prop == "lower_weight":
+            # 低位料斗重量
+            self.hopper_controller.onUpdateLowerHopperWeight(value)
+            return
+
+
     def __connectSignals(self):
         self.main_window.about_to_close.connect(self.handleMainWindowClose) # 处理主界面关闭
 
diff --git a/view/main_window.py b/view/main_window.py
index 2bf54d9..2f73d6b 100644
--- a/view/main_window.py
+++ b/view/main_window.py
@@ -112,39 +112,73 @@ class MainWindow(QWidget):
         self.bottom_control_widget = BottomControlWidget() # 最下方： 控制的按钮 （系统诊断、系统中心等）
 
     def initSubWidgets(self):
+        # 初始化派单任务的 任务id
         self.dispatch_task_widget.set_task_id("task1", "PD0001")
         self.dispatch_task_widget.set_task_id("task2", "PD0002")
         self.dispatch_task_widget.set_task_id("task3", "PD0003")
 
-        # 读取数据库，初始化 管片任务的数据
-        from busisness.blls import ArtifactBll, PDRecordBll
-        artifact_dal = ArtifactBll()
-        artifacts = artifact_dal.get_artifact_task()
-        # print("\n打印artifacts数据:")
-        for i, artifact in enumerate(artifacts):
-            # 如果是数据类对象，转换为字典输出
-            # print(artifact.MouldCode)
-            # if hasattr(artifact, "__dataclass_fields__"):
-            #     print(f"第{i+1}条: {artifact.__dict__}")
-            # else:
-            #     print(f"第{i+1}条: {artifact}")
-            self.segment_task_widget.set_task_id(f"task{i + 1}", artifact.MouldCode)
-            self.segment_task_widget.set_task_volume(f"task{i + 1}", artifact.BetonVolume)
-            pass
+        # 初始化 管片任务 和 派单任务显示的数据
+        self.update_segment_tasks()
+        self.update_dispatch_tasks()
 
-        pdrecord_dal = PDRecordBll()
-        pdrecords = pdrecord_dal.get_PD_record()
-        # print(pdrecords[0].MouldCode)
-        # print("\n打印pdrecords数据:")
-        for i, record in enumerate(pdrecords):
-            # 如果是数据类对象，转换为字典输出
-            # print(record.__dict__["MouldCode"])
-            # if hasattr(record, "__dataclass_fields__"):
-            #     print(f"第{i+1}条: {record.__dict__}")
-            # else:
-            #     print(f"第{i+1}条: {record}")
-            self.dispatch_task_widget.set_task_volume(f"task{i + 1}", record.BetonVolume)
-            pass
+    def update_segment_tasks(self):
+        """从数据库中读取管片任务数据并更新到UI"""
+        def convert_to_ampm(time_str: str) -> str:
+            """
+            将时间转换为"hh:mmAM/PM"形式(如03:22PM)
+                Args:
+                    time_str: 原始时间字符串"
+                Returns:
+                    转换后的时间字符串(如"03:22PM")
+            """
+            from datetime import datetime
+            # 可能的时间格式（优先尝试带微秒的格式）
+            time_formats = [
+                "%Y-%m-%d %H:%M:%S",       # 不带微秒
+                "%Y-%m-%d %H:%M:%S.%f"  # 带微秒（如.528453）
+            ]
+    
+            for fmt in time_formats:
+                try:
+                    dt = datetime.strptime(time_str, fmt)
+                    return dt.strftime("%I:%M%p")  # 转换为12小时制时分+AM/PM
+                except ValueError:
+                    continue  # 格式不匹配，尝试下一种格式
+    
+            # 所有格式都不匹配时，返回占位符
+            return "--:--"
+
+        try:
+            from busisness.blls import ArtifactBll
+            artifact_dal = ArtifactBll()
+            artifacts = artifact_dal.get_artifact_task()  # 获取管片任务数据
+            
+            # 遍历数据并更新UI
+            for i, artifact in enumerate(artifacts):
+                # 更新任务ID和方量到管片任务
+                self.segment_task_widget.set_task_id(f"task{i + 1}", artifact.MouldCode)
+                self.segment_task_widget.set_task_volume(f"task{i + 1}", artifact.BetonVolume)
+                if artifact.BeginTime: # 更新时间
+                    # print("artifact.BeginTime: ", artifact.BeginTime)
+                    self.segment_task_widget.set_task_time(f"task{i + 1}", convert_to_ampm(artifact.BeginTime))
+                        
+        except Exception as e:
+            print(f"更新管片任务数据失败: {e}")
+
+    def update_dispatch_tasks(self):
+        """从数据库中读取派单任务数据并更新到UI"""
+        try:
+            from busisness.blls import PDRecordBll
+            pdrecord_dal = PDRecordBll()
+            pdrecords = pdrecord_dal.get_PD_record()  # 获取派单任务数据
+            
+            # 遍历数据并更新UI
+            for i, record in enumerate(pdrecords):
+                # 更新方量到派单任务widget
+                self.dispatch_task_widget.set_task_volume(f"task{i + 1}", record.BetonVolume)
+        
+        except Exception as e:
+            print(f"更新派单任务数据失败: {e}")
 
     def setupLayout(self):
         """设置垂直布局，从上到下排列部件"""